package require ppacxlm72
APpacXLM72 dev-name
dev-name configure option value ?...?
addtcldriver create stack-name -ensemble dev-name
This Tcl driver provides support for the PPAC Readout XLM72 firmware. As with all of the XLM72 based modules, until an external firmware loader is written, the firmware is unconditionally loaded at the start of each data taking run.
-base vme-addressVME base address of the module.
-filename firmware-file-pathPath to the file containing the firmware for the module.
-pariodPeriod parameter, in the rangge [0-3].
-delay delaySet the delay value, must be in the range [0-15].
-width widthSets the width parameter, must be in the range [0-63].
-shift shiftSet the shift value. Must be in the range [0-255].
-thresholds list-of-thresholdsList of threshold values. This is a list that is at most 256 elements long. If not all elements are provided, the "missing" elements are set to 1023 which is the larges allowed threshodl value. Thresholds are in groups of four for the four connectors on the PPAC. Each group of four contains threshold for, in order a pin on connectors 0,1,2,3.