lrs2249 create module-name ?option...?
lrs2249 config module-name ?option...?
lrs2249 cget module-name
The lrs2249 command ensemble allows you to read out LeCroy model LRS 2249 modules. The LRS 2249 is a charge integrating ADC (QDC).
The create subcommand creates
a new module assigning it the module-name
you supply. The module-name can be used
to refer to the module in future commands. You may optionally
provide cofiguration information when creating the module.
The config subcommand configures an existing
module by providing configuration options for an existing
module-name (created via the
create subcommand). Configuration options are
name/value pairs that are also sometimes called switches because
of their resemblance to shell command switches. For a list of
the valid configuration options for the LRS 2249 module, see
the OPTIONS section below.
The cget subcommand returns the configuration
parameters for module-name as a Tcl list
of items. Each item is itself a two element sublist containing
in order the name and value of a configuration option.
The lrs2249 command has the following configuration options:
-id vsn
Sets the module virtual slot number to vsn.
The virtual slot number prefixes the data packet read from this
module and is used by SpecTcl as a check on the validity
the event. Each module should have a unique vsn.
If the -id option does not set the virtual
slot it defaults to 0.
-slot slot
Provides the module slot. This
parameter must match the number of the slot in the
CAMAC crate in which the module is installed.