XIV. 3vmusb
- Table of Contents
- adc -- Create/configure CAEN V775, V785, V792, V862 modules.
- caenchain -- Aggregate adc modules into CBLT readout chains.
- vmusb -- Control VM-USB resources and read internal scalers
- sis330x -- Driver for SIS3300/1 FADC
- sis3820 -- Create and configure SIS 3820 scaler modules
- v830 -- Create and configure CAEN V830 32 channel scalers.
- v977 -- Create and configure CAEN V977 Input registers
- sis3804 -- Create and configure SIS 3804 scalers
- hira -- Pair up to 2 XLMs and FADC for HiRA
- hytec -- Support the Hytec NADC 2530 adc module.
- tcl driver support -- tcl driver support functions.
- madc -- Acquire events from Mesytec MADC32 ADC.
- mtdc -- Mesytec 32/34 channel TDC
- mqdc -- Support Mesytec MQDC-32 modules
- madcchain -- Support CBLT chains of Mesytec MxDC32 family of modules.
- madcscaler -- Support dead-time counters in MADC32 as scalers.
- mase -- Support for XLM with MASE firmware.
- tdc1x90 -- Provide support for the CAEN V1x90 TDC family.
- v1729a -- CAENV1729a waveform digitizer.
- stack -- Compose and configure VM-USB readout stacks.
- CVMUSB -- Interface with VM-USB controller.
- CVMUSBReadoutList -- Construct VM-USB stacks
- CVMUSBRemote -- Execute lists remotely on VMUSBReadout
- CConfigurableObject -- Configuration database
- CControlHardware -- Base class for slow controls drivers
- cvmusb -- SWIG Tcl wrapping of
CVMUSB - cvmusbreadoutlist -- SWIG wrappers for
CVMUSBReadoutList
- Module -- control config command: create/configure modules.
- watch -- Watch variables (slow controls)
- delay -- Insert a stack delay.
- CBDCamacBranch -- run a CAMAC branch through a CES CBD8210 bridge
- CBDCamacCrate -- group CBD8210 compatible modules into a crate
- CBDLeCroy4300B -- control a LeCroy 4300B FERA on a CAMAC branch
- CBDLeCroy4434 -- control a LeCroy 4434 Scaler on a CAMAC branch
- CBDLeCroy2551 -- control a LeCroy 2551 Scaler on a CAMAC branch
- CBDULMTrigger -- control a LeCroy 2637 ULM running trigger firmware on a CAMAC branch
- XLMTimestamp -- control an XLM running 64-bit latching scaler firmware
- marker -- Insert a constant into the VMUSB data stream
- XLMFERA -- control an XLM72V running firmware to readout FERA via ECL ports
- AXLM72ScalerControl -- slow-controls driver for controlling an XLM72 running 32-ch scaler firmware
- XLM72ScalerGUI -- Diagnostics GUI for controlling an XLM72 running 32 ch scaler firmware
- AXLM72 -- TCL base class for JTech XLM72 family of devices
- AXLM72Scaler -- Driver for an XLM72 running 32-channel scaler firmware
- v1495sc -- CAEN V1495 with Scaler firmware
- controlClient -- Object to interact with VM/CCusb control server
- USB Control operations -- connect, controlOp, listUSBControlServers
- slowControlsPrompter -- Prompt for slow controls server host and port
- gdgcontrol -- Slow control client of Wiener/JTec MGGD8
- gdgwidget -- Widget to control/display GDG-8.
- V6533Driver -- Driver for CAEN V6533 HV modules